ZTree.com  | ZEN  | About...  

 Index   Back

[Tip] How to control drive letters to 25 external HDs simultaneously   [Tip]

By: Ron Metzger       
Date: Jul 28,2014 at 18:19
In Response to: [Tip] How to control drive letters to 25 external HDs simultaneously (Ron Metzger)

> > > I connected the drives progressively to my PC. They each mounted
> > as E:
> > > drive. I used SUBST to map the drives to different drive letters
> > > including non-existent floppy drives A: and B: and the DVD drive
> D:.
> >
> > Is there any way to get a USB drive to mount as a chosen drive letter
> > automatically?
>
> Yes, but rather manual setup.
>
> After inserting the USB drive, right-click on (My-)Computer and select
> 'Manage'
> Under 'Computer Management' -> 'Storage' select 'Disk Management'
>
> Locate the currently installed USB drive and in the lower panel,
> right-click this drive (partition) and select 'Change Drive Letters and
> Paths...'
>
> The current Drive Letter should be shown. Select 'Change' and in the
> drop-down select the drive letter you want to assign.
>
> Wash, Rinse, Repeat.
>
> If Windows is behaving normally, the next time that USB drive is
> inserted, the last drive letter definition should return. Windows is a
> bit schizophrenic at times, so you will need to keep an eye on the drive
> letters and adjust them if they change.
>
> Ron Metzger

David Bullock beat me to it!

618 views      
Thread locked
 

Messages in this Thread

 
94,977 Postings in 11,970 Threads, 349 registered users, 35 users online (0 registered, 35 guests)
Index | Admin contact |   Forum Time: May 29, 2020 - 11:41 am EDT  |  Hits:31,259,591  (4,551 Today )
RSS Feed